...
The compatibility of the Billion M500 device with the SOCIFI platform was tested on the firmware version 1.04.1.150173. This manual shows just the features required for the hotspot with the external captive portal functionality. The manual presumes a preconfigured device with active WLAN and WAN. The internal DHCP server and the external DNS server were used for the testing environment.
...
Hotspot | Activated |
---|---|
Interface | WLAN1 and any other wifi interface with SOCIFI settings |
IP Address | hotspot IP address and DHCP pool start |
IP Subnet Mask | hotspot IP mask and DHCP pool range |
Primary DNS | default: OpenDNS (208.67.222.222) or enter IP according to your infrastructure |
Secondary DNS | default: OpenDNS (208.67.222.220) or enter IP according to your infrastructure |
Login Mode | Authentication |
Redirection On Successful Authentication To | <empty> |
...
UAM Server | External |
---|---|
Login URL | http://connect.socifi.com |
Shared Secret | <empty> |
NAS ID | BILL_<mac_of_wifi> (the same mac address as mac address in SOCIFI dashboard - without separator - see bellow) |
Location Name | <empty> |
WalledGarden
Set allowed destinations for not authenticated users in "Configuration / Hotspot / Walled Garden". Add single domain names listed in the table below to the rules. Select Rule Index, set Active=Yes, Allow Type = DOMAIN and add the domain name from the table. The initial dot is compulsory. The number of rules is limited to 1648. The rules 15 and 16 shown in the screenshot below are IP addresses of the DNS1 and DNS2 (2088.678.222.222 a 208.67.220.2208.8 and 8.8.4.4) assigned to client devices.
Include Page | ||||
---|---|---|---|---|
|
Add a new hotspot to SOCIFI Dashboard
...