Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Tested Access Point:Cradlepoint AER1600
Tested Firmware:7.0.70
Tested Settings:

cradle point AER1600 was tested in a stand-alone mode without using the NetCloud Management

Nastavení služby hotspotu pro vybranou skupinu interface


Pro vybranou skupinu interface v nastavení Set the hotspot service for the selected interface

Go to Networking / Local Networks / Local IP Networks nastaveníme v editaci mode pro Networks and set IPv4 Routing Mode hodnotu to HOTSPOT. 


Settings of the external portal

Nastavení provádíme v Go to Networking / Local Networks / Hotspot Services

Hotspot Settings

FieldValue
Hotspot Mode

RADIUS/UAM

Hotspot/UAM Auth Port8080

Image Modified

RADIUS Servers Setup

FieldValue
Server Address 1according to the GEO selector tool
Server Address 1according to the GEO selector tool
Auth Port1812
Acc Port

1813

Server Timeout5 Secs
Server Retries3 Retries
Shared Secretsocifi
Redirection On Successful AuthTo an administrator-defined URL
URLhttp://connect.socifi.com/api/v1/out/session


Include Page
RADIUS / AAA Settings
RADIUS / AAA Settings

Captive Portal Settings

FieldValue
Login URLhttp://connect.socifi.com
Shared SecretAny (not required by SOCIFI)
NAS/Gateway IDCP_<MAC-of-your-AP-device>


Info

Please pay attention to set the NAS ID in the correct format with the prefix "CP", otherwise, the hotspot will not work properly with SOCIFI.



Image Modified

Walled Garden Settings

Include Page
DD-WRT
DD-WRT

Configure Time Settings

The length of each session is ruled set by the time and date stamp, therefore you need to check Network Time (NTP) synchronization in SYSTEM / Services.  Timezone needs The timezone needs to be set as your location timezone and timeserver set according to the information below.

...

Add device at SOCIFI Dashboard



 

Anchor
Register
Register

Info

As equipment under the Hardware setting select the Cradlepoint

...