How to Install DD-WRT 2.x on a Wireless Router

Owned by Support
Last updated: May 20, 2016
1 min read
Please note the usage of any DD-WRT firmware is at your own risk. SOCIFI does NOT provide any configuration help via remote access or any other type of support for DD-WRT devices. If you are looking for affordable easy-to-use hardware for end-users please consider Open-Mesh, Mikrotik or other devices.

DD-WRT 3.x Firmware has not been tested yet, please use 2.x version.

How to downgrade DD-WRT 3.x to supported DD-WRT 2.x?

  1. Go to http://www.dd-wrt.com/site/support/other-downloads and point to Downloads > betas > 2015 > 09-28-2015-r27858



  2. Find your device and download DD-WRT 2.x firmware for it

The instructions how to instal DD-WRT can be found at official support DD-WRT center.

Configure your DD-WRT 2.x powered device

  1. Visit our configuration guide at DD-WRT firmware 2.x Set-Up Guide

Please note the usage of any DD-WRT firmware is at your own risk. SOCIFI does NOT provide any configuration help via remote access or any other type of support for DD-WRT devices. If you are looking for affordable easy-to-use hardware for end-users please consider Open-Mesh, Mikrotik or other devices.