ANTLabs IG3100

Owned by Tomas Silny
Last updated: Sept 27, 2016 by Support
1 min read

This device is compatible, but the setup guide is not public yet.

Please contact SOCIFI Support and provide us with more details about your network (number of access points, monthly connected users, location of your deployment and other relevant information).

Make sure your Firewall Settings are set correctly.

If you have a Firewall, it may or may not block the communication / connection to SOCIFI Servers (Captive Portal, API endpoints, RADIUS servers).

The following IP Addresses have to be passed thru the Firewall or any other blocking mechanism to successfully reach SOCIFI. Without allowing these IP Addresses to go thru your Firewall, your deployment cannot work properly.

API Access is used by Ruckus, Ubiquiti and ANTlabs devices

VPC:
use-1: 52.44.148.136
euw-1: 52.18.131.55
aps-1: 52.77.200.241
sae-1: 54.233.193.15

non-VPC:
euw-1: 54.246.88.74
use-1: 54.204.47.201    
aps-1: 54.251.110.178    
sae-1: 54.232.124.137