Tested versions:
| Model | Type | Firmware version | Description | Limitations |
|---|---|---|---|---|
E-400 | AP | AP with Hotspot | - |
Tested device cnPilot E-400 features dual-band WiFi, the embedded router with DHCP and NAT service and VLAN support. This device is fully compatible with SOCIFI platform. The device was tested in bridge mode with external DHCP and DNS servers.
...
Choose the RADIUS server set according to the RADIUS server selection tool:
Include Page RADIUS / AAA Settings RADIUS / AAA Settings
Go to Configure / WLAN (fig.1 a 2).
Select the required WiFi according to the SSID (fig.3).
On the tab Radius Server (fig.4) enter the primary (fig. 5 a 9) and secondary (fig. 7 a 11) server according to the RADIUS server selection tool.
Use "socifi" as Secret (fig.6,8,10 and 12).
As Accounting mode (fig.13) choose "Start-Interim-Stop".
Server pool mode (fig.14) set to "Load Balance".
As NAS Identifier (fig.15) use hotspot ID composed form the prefix "CNP_" (CNP+underscore) and the MAC address of the device (eg. :"CNP_00-04-56-AA-D6-D4").
Set Interim Update Interval (fig.16) to "1800".
Save the configuration (fig.17).
3. Captive portal setup
Go to Configure / WLAN, tab Guest Access (fig.1).
...
Redirection URL Query String (fig.8) check all: "Client IP,RSSI,AP Location".
Save the configuration (fig.9).
4. Walled Garden
Include Page Cisco Meraki, Ruckus, Xirrus, Huawei Cisco Meraki, Ruckus, Xirrus, Huawei
To set Walled Garden, go to the bottom of the Guest Access config page.
Enter the domain names listed in the table above individually (fig.1) and Save (fig.2)
5. Register your hotspot
For registration in the SOCIFI Dashboard use the MAC address of the device (See section 1. of this guide). As device vendor select Cambium cnPilot.
...