It is required to upgrade all nodes (APs) in the network and upgrade CloudTrax version to version 4. To upgrade firmware from version 4xx to 6xx and upgrade CloudTrax Dashboard you need to follow the recommendations in the settings in the CloudTrax Dashboard. Tested on Firmware version 6.0 (Beta 1), 6.0 (Beta 5), 6.0 (Beta 7)
|
Check firmware version first. Firmware version must be 6.0 at least. Note the MAC address of AP for later use.
Go to Configure tab and select SSID (1-4) you want to configure. Enter SSID name, enable it (Enable = on) and make it visible (Visible = on). "Authentication" leave unchecked (Authentication = off).
Captive portal settings follow. Enable "Bandwidth throttling" and set maximal limits. Bandwidth limits are set in the SOCIFI Dashboard and applied dynamically during authentication.
Set the next "Splash page configuration" options as follows:
| Splash page | Hosted remotely |
|---|---|
| Splash Page URL | http://connect.socifi.com |
| Splash page authentication | RADIUS |
| Server address 1 | <dns-name-of-primary-socifi radius-server-by-region> |
| Server address 2 | <dns-name-of-seconary-socifi radius-server-by-region> |
| Server secret | socifi |
| NAS ID | OM6xx_yourDeviceMacAddress for example: OM6xx_AC8875415EF8 |
In the next part set Walled Garden, access for unauthenticated users. Enable "Block unauthenticated users" (Block unauthenticated users = on) option and fill in the Walled Garden gap with domain names as listed below:
Leave other options in the default settings (see the picture below).
The setting of the node is done now. All changes will appear within 1 - 2 minutes (as stated in the alert after saving the changes). To assure correct settings reboot all nodes (APs). You can reboot the nodes remotely in the CloudTrax, go to menu "Manage / Access Points" and select an appropriate node and reboot it.
In a hardware manufacturer selection use OpenMesh 6x. |
https://help.cloudtrax.com/hc/en-us/articles/206490603-Firmware-6-0-Change-Log-Public-Beta-