EnGenius ezMaster
The compatibility was tested using EWS330AP device and should work with all devices compatible with ezMaster software version 1.0.22
The setup guide presumes active “Project” with active Access Points listed in AP Group.
Captive Portal Setup
In ezMaster administration go to Projects, select your project.
Select Hotspot Service, Captive portal
Click on “Add” and create a new Captive Portal Profile
Set the following parameters
Profile Name | SOCIFI |
|
Network Connection Mode | NAT (you can select Bridge according to your network environment. Bridge mode supports fast roaming) |
|
Authentication Type | RADIUS server |
|
Auth Type | PAP |
|
Primary RADIUS Server | According to the RADIUS selection tool (see below) |
|
Secondary RADIUS Server | According to the RADIUS selection tool (see below) |
|
RADIUS Port | 1812 |
|
RADIUS Secret | socifi |
|
Enable RADIUS Accounting | checked |
|
Accounting RADIUS port | 1813 |
|
Accounting RADIUS interval | 600 |
|
Splash Page |
|
|
External Splash Page URL |
| |
Redirect Behavior | Redirect to the URL that the user was trying to visit |
|
Walled Garden | Enable |
|
Walled Garden List | See table for necessary IP ranges |
|
Save Changes |
|
|
RADIUS Selection Tool
Walled Garden IP ranges
SOCIFI basic functionality - these IP ranges must be listed.
52.51.203.246/32,52.44.151.156/32,54.232.88.133/32,54.251.110.178/32
SOCIFI CDN - add these ranges only the captive portal is not loading properly. See Cap100 error https://socifi-doc.atlassian.net/wiki/spaces/SC/pages/25821255
13.32.0.0/15,13.35.0.0/16,13.54.63.128/26,13.59.250.0/26,34.195.252.0/24,35.162.63.192/26,52.15.127.128/26,52.46.0.0/18,52.52.191.128/26,52.57.254.0/24,52.66.194.128/26,52.78.247.128/26,52.84.0.0/15,52.199.127.192/26,52.212.248.0/26,52.220.191.0/26,52.222.128.0/17,54.182.0.0/16,54.192.0.0/16,54.230.0.0/16,54.233.255.128/26,54.239.128.0/18,54.239.192.0/19,54.240.128.0/18,70.132.0.0/18,71.152.0.0/17,99.84.0.0/16,143.204.0.0/16,204.246.164.0/22,204.246.168.0/22,204.246.174.0/23,204.246.176.0/20,205.251.192.0/19,205.251.249.0/24,205.251.250.0/23,205.251.252.0/23,205.251.254.0/24,216.137.32.0/19
Social Networks - add these ranges only if you need to enable Social Login
Due to the problems with the activation of the captive portal on IP-based Walled Garden systems with many allowed IP ranges, add these ranges only if you want to use the Social Network Login.
Generally, we cannot recommend using the Social Network Login on IP-based hotspot systems
Facebook + Instagram
31.13.24.0/21,31.13.64.0/18,45.64.40.0/22,66.220.144.0/20,69.12.56.0/21,69.171.224.0/19,69.63.176.0/20,74.119.76.0/22,103.4.96.0/22,129.134.0.0/16,157.240.0.0/16,173.252.64.0/18,179.60.192.0/22,185.60.216.0/22,204.15.20.0/22
Google (not recommended. prevents triggering of Captive Portal on Android devices)
Assign Captive Portal Profile to SSID
Go to AP Groups, Select group, Edit Group
Go to “WLAN settings”
Click on the SSID to be associated with Captive Portal profile and set:
Captive Portal section |
|
|
Status | Enable |
|
Profile | SOCIFI |
|
Save |
|
|
Add your device to the SOCIFI Dashboard
Add MAC addresses of all APs listed in the AP group engaged with Captive Portal Profile.
Choose EnGenius ezMaster as Hardware Type