Tested versions:
Model | Type | Firmware version | Note |
---|---|---|---|
APC Button | AP + controller | 2-3352.v5.95-2.52985 | SOCIFI ready |
Intro:
SOCIFI and Ligowave (formerly Deliberant) are glad to present embedded SOCIFI configuration in LigoWave firmware called SOCIFI ready. From now on the SOCIFI configuration gets much easier and also significantly decreases any chance for miss-configuration. You may check the old Guide to see what has changed.
1. Get the right firmware
Go to: https://www.ligowave.com/downloads check APC then 2 GHz then Button and download the firmware: v5.95-2 Hotspot (CLOUD4WI, SOCIFI). Upgrade your APC button.
2. Network Setting
Set the correct mode (see the picture below). Go to Configuration > Network > Network mode = Router and than enable at least one DNS server as displayed in the WAN, wired section. When done, click on the Save & Apply button to save and activate the setting.
...
Include Page | ||||
---|---|---|---|---|
|
Iframe | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|