SOCIFI is proud to be Cisco Meraki Technology Partner
| Info | ||
|---|---|---|
| ||
MR12, MR16, MR18, MR26, MR34, MR62, MR66, MR72 Are you missing some options in the Meraki Dashboard? Continue here. |
...
Note: The configuration without RADIUS authentication can be found here: Meraki without external RADIUS authentication.
Common Issues & resolutions:
Are you missing some options in the Meraki Dashboard?
1. Log into Meraki Dashboard
| Info |
|---|
2. RADIUS server setting
Select Wireless > Access control. Pick the SSID you want to work with and on the Network access in the Splash page section please check Sign-on with and pick "my RADIUS server". In the RADIUS for splash page section please add the Primary RADIUS server first and then Secondary as follows:
| Include Page | ||||
|---|---|---|---|---|
|
...
In the Failover Policy section select "Deny Access" and in the Network access control section select "Disabled: do not check clients for antivirus software"
3. Walled garden ranges setting
Select Walled garden > set Walled garden is enabled
| Include Page | ||||
|---|---|---|---|---|
|
...
| Captive portal strength | Allow non-HTTP trafic prior to sign-on |
|---|---|
| Walled garden | Walled garden is enabled |
| Walled garden ranges | < copy from the list above> |
| Simultaneous logins | Allow simultaneous device per user |
| Controller disconection behavior | Default for your settings |
4. Splash page Setup
Go to Wireless > Splash page and select Custom splash URL then enter: http://connect.socifi.com
5. Get the MAC address you'll need later for the SOCIFI dashboard administration
Go to Wireless > Access points and select wished AP. The MAC address is Configuration details (as pictured)
6. Add a new hotspot to SOCIFI Dashboard
...