Cradlepoint

Owned by Support
Last updated: Feb 05, 2021 by Lukáš Miarka
2 min read
Tested Access Point:Cradlepoint AER1600
Tested Firmware:7.0.70
Tested Settings:

cradle point AER1600 was tested in a stand-alone mode without using the NetCloud Management


Set the hotspot service for the selected interface

Go to Networking / Local Networks / Local IP Networks and set IPv4 Routing Mode to HOTSPOT.


Settings of the external portal

Go to Networking / Local Networks / Hotspot Services

Hotspot Settings

FieldValue
Hotspot Mode

RADIUS/UAM

Hotspot/UAM Auth Port8080

RADIUS Servers Setup

FieldValue
Server Address 1according to the GEO selector tool
Server Address 1according to the GEO selector tool
Auth Port1812
Acc Port

1813

Server Timeout5 Secs
Server Retries3 Retries
Shared Secretsocifi
Redirection On Successful AuthTo an administrator-defined URL
URLhttp://connect.socifi.com/api/v1/out/session


We recommend to use this set of RADIUS servers:
 


 List of RADIUS according to your location:
 For North America

RADIUS Server 1

rad-1-use-1.socifi.com or IP address: 52.7.148.174, Radius shared secret: socifi

RADIUS Server 2

rad-2-use-1.socifi.com or IP address: 52.55.217.23, Radius shared secret: socifi

 For Europe and Africa

RADIUS Server 1

rad-1-euw-1.socifi.com or IP address: 52.209.184.212, Radius shared secret: socifi

RADIUS Server 2

rad-2-euw-1.socifi.com or IP address: 52.50.155.202, Radius shared secret: socifi

 For Asia-Pacific

RADIUS Server 1

rad-1-euw-1.socifi.com or IP address: 52.209.184.212, Radius shared secret: socifi

RADIUS Server 2

rad-2-euw-1.socifi.com or IP address: 52.50.155.202, Radius shared secret: socifi

In order to have the Radius communication working fine, the IP addresses (above) and the ports 1812 Auth and 1813 Acc must be accessible.

Captive Portal Settings

FieldValue
Login URLhttp://connect.socifi.com
Shared SecretAny (not required by SOCIFI)
NAS/Gateway IDCP_<MAC-of-your-AP-device>

Please pay attention to set the NAS ID in the correct format with the prefix "CP", otherwise, the hotspot will not work properly with SOCIFI.



Walled Garden Settings

If you are customer with White Label solution, please add your custom domain (for example mycustomdomain.com) to the Walled Garden list.

socifi.com facebook.com akamaihd.net akamai.net edgecastcdn.net twitter.com twimg.com fastly.net li-cdn.net cloudfront.net fbcdn.net instagram.com cdninstagram.com linkedin.com licdn.com
 Want to Allow Google+ login ?

The new Allow login through social networks does not include the Google login. The reason is that some Android based devices are not redirected to the Captive Portal when the user gets connected to WiFi network. In case you'd like to add it you need to do following:

  1. Check if your hotspot allows DNS names in the Walled garden. Some hotspots can use IP addresses only. See: Why DNS-based Walled Garden (and not IP-based)
  2. Allow Google+ login: Settings > Brand > Authentication > Allow login through social networks > Set on Allow Google login
  3. Add these walled garden domain into existing list:

Google+ Login DNS's

Please adopt same format your Walled garden is already using e.g. with or without the asterisk, separated by comma or space etc.

 For Cisco Meraki, Ruckus, Xirrus
*.googleapis.com
*.googleusercontent.com
*.gstatic.com
*.accounts.youtube.com
*.apis.google.com
*.accounts.google.com
*.l.google.com

The local accounts.google.XX domain must be added into the Walled Garden list. For example accounts.google.co.uk for United Kingdom, accounts.google.com.sg for Singapore, accounts.google.de for Germany etc. Google domains list you can find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

 For Open Mesh
googleapis.com,googleusercontent.com,gstatic.com,accounts.youtube.com,apis.google.com,accounts.google.com,l.google.com

The local accounts.google.XX domain must be added into the Walled Garden list. For example accounts.google.co.uk for United Kingdom, accounts.google.com.sg for Singapore, accounts.google.de for Germany etc. Google domains list you can find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

 For Mikrotik
/ip hotspot walled-garden
add dst-host=*.googleapis.com
add dst-host=*.googleusercontent.com
add dst-host=*.gstatic.com
add dst-host=*.accounts.youtube.com
add dst-host=*.apis.google.com
add dst-host=*.accounts.google.com
add dst-host=*.l.google.com
add dst-host=accounts.google.com

The local accounts.google.XX domain must be added into the Walled Garden list. For example accounts.google.co.uk for United Kingdom, accounts.google.com.sg for Singapore, accounts.google.de for Germany etc. Google domains list you can find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

 For DD-WRT
googleapis.com googleusercontent.com gstatic.com accounts.youtube.com apis.google.com accounts.google.com l.google.com

The local accounts.google.XX domain must be added into the Walled Garden list. For example accounts.google.co.uk for United Kingdom, accounts.google.com.sg for Singapore, accounts.google.de for Germany etc. Google domains list you can find at https://ipfs.io/ipfs/QmXoypizjW3WknFiJnKLwHCnL72vedxjQkDDP1mXWo6uco/wiki/List_of_Google_domains.html

Related pages:

The Splash Page is not triggered when Android devices connect to WiFi



Configure Time Settings

The length of each session is set by the time and date stamp, therefore you need to check Network Time (NTP) synchronization in SYSTEM / Services. The timezone needs to be set as your location timezone and timeserver set according to the information below.

Please set servers that are as close to your location as possible. You can find NTP list here: http://www.pool.ntp.org/en/


Add device at SOCIFI Dashboard



 

As equipment under the Hardware setting select the Cradlepoint


Step 1: Login to SOCIFI Dashboard

Step 2: Click on the "Hotspots" tab on the left sidebar

Step 3: Click on the “Add a new hotspot” button located on the top right corner on the screen (pictured below)

Note: A pop-up window will appear (below)

Step 4: Select the Wi-Fi hardware manufacturer from the drop down menu

Step 5: Enter the serial number or MAC address (depending on the specific equipment manual) of your equipment. You can add multiple hotspots at once.

Step 6: Set your Network location (this step is essential for correct ad targeting)

Step 7: In the pop-up window type your location or just move the marker on the map and click on the save button to confirm the selection. This address is used for ad GEO targeting.

Step 7: Click Save

Note: Newly added hotspot are marked as  (Hotspot pending). After the first user connects to the hotspot via SOCIFI, the status will automatically change and appear as  (Active) within an hour. Get your first connections to test if it works properly.